[vc_row][vc_column][vc_column_text text_larger=”no” woodmart_inline=”no”]
TVB624-11SF Steel-Faced Bumper
[/vc_column_text][vc_single_image image=”36627″ img_size=”large” parallax_scroll=”no”][vc_column_text text_larger=”no” woodmart_inline=”no”]TVB624-11SF – Thickness: 6” Height: 24” Length: 11” SN#22-2103, 22-2104, 22-2105 see mounting options
The TVB624-11SF is a quality laminated rubber bumper but incased with an even tougher steel plate face. Importantly, steel-faced dock bumpers reduce friction while absorbing impact force by up to 70%. This means they can handle your deliveries and heavy loads.
Do you have trucks with air-ride trailers and loading dock equipment like dock levelers? Do you notice pitting or tearing in your existing rubber bumpers? Steel-faced dock bumpers like the TVB624-11SF will not break down under everyday contact and stressors. They are designed to absorb impact while reducing and handling friction too. This makes them perfect for docks that have up and down movement from common equipment.
Unlike most steel-faced models the TVB624-11SF is a vertical dock bumper with 24″ of vertical coverage. This model uniquely spans the gap for docks, like many around the country, with varying truck height. The TVB624-11SF is a high-quality Ideal Warehouse (IWI) dock bumper.
Mounting and Installation
Three mounting options are available: steel angles for most applications, equipped with 1/4″ steel angles on both sides, bumpers with flat plates (welded installations) or a combination of a steel angle on one side and flat plate on the other. See below:
Standard – Steel Angles on Both Sides (bolted Installation) SN#22-2103
P1- Plate on one side / angle on the other (welded and bolted installation) SN#22-2104
P2- Plates on both sides (welded Installation) SN#22-2105
Make mounting and hardware selection for TVB624-11SF above. (We provide welding plates or concrete wedge anchors for mounting to concrete surfaces.)[/vc_column_text][/vc_column][/vc_row][vc_row][vc_column width=”1/2″][vc_column_text woodmart_inline=”no” text_larger=”no”]
- Eliminates costly repairs from severe shock to loading docks.
- Absorbs up to 70% of impact force.
- Impact absorbing bumper with a steel face to reduce friction.
- Provides protection against vehicle damage to docks, buildings and cargo.
- Manufactured from 80% recycled material – a green product.
- TVB624-11SF a Ideal Warehouse Innovations (IWI) product.
[/vc_column_text][/vc_column][vc_column width=”1/2″][vc_column_text woodmart_inline=”no” text_larger=”no”]
Uses and Applications for Steel Face Dock Bumpers
TVB624-11SF steel-face bumpers protect against friction.
Best for use in loading docks with air-ride trailers or dock equipment cause up and down movement.
Vertical build provides 24″ of linear coverage for different truck heights.[/vc_column_text][/vc_column][/vc_row]