[vc_row][vc_column][vc_column_text woodmart_inline=”no” text_larger=”no”]B4520-11-SF – 20″ High x 11″ Long x 45″ Thick
The B4520-11-SF is a quality laminated rubber bumper but incased with an even tougher steel plate face. Importantly, steel-faced dock bumpers reduce friction while absorbing impact force by up to 70%. This means they can handle your deliveries and heavy loads.
Do you have trucks with air-ride trailers and loading dock equipment like dock levelers? Then Steel-faced dock bumpers like the B4520-11-SF is what you need. This model will not break down under everyday contact and stressors. They are designed to absorb impact while reducing and handling friction too. This makes them perfect for docks that have up and down movement from common equipment and typical setups.
Unlike most steel-faced models the B4520-11-SF is a vertical dock bumper with 20″ of vertical coverage. This model uniquely spans the gap for docks, like many around the country, with varying truck height because of different delivery scenarios. The B4520-11-SF is a high-quality Durable dock bumper and is made proudly in the USA.
Mounting and Installation
Three mounting options are available: steel angles for most applications, equipped with 1/4″ steel angles on both sides, bumpers with flat plates, for welded installations, or a combination of a steel angle on one side and flat plate on the other. See below:
Standard – Steel Angles on Both Sides (bolted Installation)
P1- Plate on one side / angle on the other (welded and bolted installation)
P2- Plates on both sides (welded Installation)
Make mounting and hardware selection above. (We provide hardware are concrete wedge anchors for mounting B4520-11-SF to concrete surfaces.)
[/vc_column_text][/vc_column][/vc_row][vc_row][vc_column width=”1/2″][vc_column_text woodmart_inline=”no” text_larger=”no”]Uses and Applications for Steel Face Dock Bumpers
Steel faced bumpers protect against friction caused by trailers as well as loading dock equipment like dock levelers.
Best for use in loading docks with air-ride trailers or other dock equipment that cause up and down movement.
This model is a vertical loading dock bumper and will protect your dock from varying truck height.[/vc_column_text][/vc_column][/vc_row][vc_row][vc_column width=”1/2″][vc_column_text woodmart_inline=”no” text_larger=”no”]Benefits
Eliminates costly repairs from daily use by severe shock to loading docks.
Absorbs up to 70% of impact force.
Reduces friction from air-ride trailers and dock equipment unlike rubber bumpers that may pit and wear out.
Vertical build provides 20″ of linear coverage for different truck heights.
Provides protection against vehicle damage to docks, buildings and cargo.
Manufactured from 80% recycled material – above all a green product.[/vc_column_text][/vc_column][/vc_row][vc_row][vc_column][/vc_column][/vc_row]